- Infrared barrier of 4 beams for outdoor
- Wired
- Maximum sender / receiver detection 30 m (exterior)
- Horizontal adjustment 180º (±90º)
- 2 work frequencies
- LED and buzzer for easy installation
- Power supply 9~30 VDC
ABI30-764
Infrared barrier detectorWired | 4 beamsMax distance. The detection 30 mEasy installation with LED and buzzerNC/NO relay outputsPower supply 9~30VDC
344,19 kr.
Out of stock
Out of stock
19
People watching this product now!
-
International shipping EU Rat
Our courier will deliver to the specified address
5-12 Days
150 kr
-
Fast shipping
Our courier will deliver to the specified address
2-4 Days
300 kr
Description
Specification
Overview
| Detection range |
30m outdoor |
|---|---|
| Number of beams |
4 |
| Detection method |
Interruption of 2 continuous beams at a time |
| Sensitivity |
Adjustable between L, M H |
| Frequency channels |
2 different channels over DIP Switch |
| Alarm outputs |
1 relay NO/NC (max. 30VDC/VAC, 0.5A) |
| Alignment angle |
Horizontal 180°(±90°) |
| Adjustment method |
Over LED and buzzer |
| Operating temperature |
-25ºC ~ +55ºC |
| Degree of protection |
IP65 |
| Power |
9~30 VDC, 50~120 mA |
| Dimensions |
76(H) x 4(W) x 7(D)cm |
Customer Reviews
Related Products
ABI100-1408
In stock
557,26 kr.
| Detection range |
100m outdoor |
|---|---|
| Number of beams |
8 |
| Detection method |
Interruption of 2 continuous beams at a time |
| Sensitivity |
Adjustable between L, M and H |
| Frequency channels |
2 different channels over DIP Switch |
| Alarm outputs |
1 relay NO/NC (max. 30VDC/VAC, 0.5A) |
| Alignment angle |
Horizontal 180°(±90°) |
| Adjustment method |
Over LED and buzzer |
| Operating temperature |
-25ºC ~ +55ºC |
| Degree of protection |
IP65 |
| Power |
9~30 VDC, 50~120 mA |
| Dimensions |
140(H) x 4(W) x 7(D)cm |
ABL30-18510A
In stock
2.704,35 kr.
| Detection range |
30 m exterior |
|---|---|
| Number of beams |
10 |
| Detection method |
Interruption of 2 continuous beams at a time |
| Communication |
One address per tower: sender or receiver |
| Sensitivity |
Adjustable between L, M, H |
| Frequency channels |
2 different channels over DIP Switch |
| Alarm outputs |
1 relay NO/NC (max. 30VDC/VAC, 0.5A) |
| Alignment angle |
Horizontal 180°(±90°) |
| Adjustment method |
Over LED and buzzer |
| LED light |
E27 230VAC (included) |
| Operating temperature |
-25ºC ~ +55ºC |
| Degree of protection |
IP65 |
| Power |
12~18 VDC, 90 mA max. |
| Dimensions |
185 cm height |
ABO-20F
In stock
81,95 kr.
| Detection range |
20m indoor / 10 m outdoor |
|---|---|
| Number of beams |
1 |
| Detection method |
Infrared beam interruption |
| Frequency channels |
4 different channels over DIP Switch |
| Alarm outputs |
1 relay NO/NC (max. 36VDC/VAC, 1A) |
| Adjustment method |
Over LED |
| Operating temperature |
-25ºC ~ +55ºC |
| Power |
9~16 VDC/VAC, 20 mA max. |
| Dimensions |
69.5 (H) x 26.4 (W) x 22.5 (D) mm |
FIREBEAM-100M
In stock
2.048,75 kr.
| Certification |
LPCB / CE-CPREN54-12:2015BS 5839 Part1:2017 |
|---|---|
| Coverage distance |
1 Mode: 8 – 20 m (Need 1 reflective panel)2 Mode: 20 – 40 m (Need 1 reflective panel)3 Mode: 40 – 70 m (Need 4 reflective panels)4 Mode: 70 – 100 m (Need 4 reflective panels) |
| Sensitivity |
Level 1: 2.6dB (High Sensitivity)Level 2: 3.8dB (Average sensitivity)Level 3: 5.8dB (Low Sensitivity) |
| Configuration |
Via DIP Switch |
| Alignment Guide |
Laser pointer |
| Indications |
Via Display for configuration and LED for faults (Red: fire / Yellow: failure / Green: Aligned) |
| Reset time |
Less than 2 seconds without power |
| Relay |
2 relays (fire and fault) NO/NC, 30VDC/2A max. |
| Power |
20-28 VDC |
| Consumption |
Standby: 23mAAlarm: 33mA |
| Dimensions |
L:190.87 x W:126.87 x H:91.96 mm |
| Weight |
440g |
| Material |
ABS plastic |
| Degree of protection |
IP30 |
| Temperature Range |
-10~55ºC |
| Humidity |
0~95% relative humidity, non-condensing |
Reviews
Clear filtersThere are no reviews yet.