- Duevi
- Outdoor detector with low consumption
- Double PIR
- Anti-masking technology
- Detection: Range 15 m / 90º
- Motion detection indicator
- Tamper-resistant opening
- Power supplied by Ajax Transmitter
- Compatible with Ajax radio transmitter
- Outdoor use
- Degree of protection IP54, vandal resistant IK10
DV-MONOLITH-K
Duevi low power consumption outdoor detectorCompatible with Ajax Transmitter (included)Double PIR / Detection 15 mAntimasking / Pet immunityPower supplied by TransmitterOutdoor use IP54 / Antivandalic IK10
1.281,70 kr.
14
People watching this product now!
-
International shipping EU Rat
Our courier will deliver to the specified address
5-12 Days
150 kr
-
Fast shipping
Our courier will deliver to the specified address
2-4 Days
300 kr
Description
Specification
Overview
| Brand |
Duevi |
|---|---|
| Model |
Monolith K |
| Technology |
Double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Frequency |
868 MHz Jeweller (Ajax transmitter included) |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: alarm confirmation) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Low battery warning |
Signal sent by Ajax transmitter |
| Power |
Supplied by Ajax Transmitter (do not insert additional batteries) |
| Consumption |
Minimal consumption (Rest: 8 uA / Maximum: 5 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 106 (D) mm (transmitter spacing) |
Customer Reviews
Related Products
DV-KAPTURE-F
In stock
710,51 kr.
| Brand |
Duevi |
|---|---|
| Model |
Kapture F |
| Technology |
Double technology: microwave (24 GHz) and curtain type PIR |
| Detection range |
Configurable: 3 m to 12 m (depending on installation) / PIR 7.5º / Microwave 30º |
| Pet immunity |
Not available |
| Installation height |
Recommended 2.2 m (from 2 to 4 meters) |
| Masking |
Available |
| Sensitivity |
Adjustable (potentiometer from 30% to 100% or through App) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue). IR detection (red) and Walk test (red): IR / blue: alarm confirmation) |
| DIP Switch configuration |
Walk-test (On/Off), Anti-masking (On/Off), Programming by App (On/Off), Unification of alarms on one output (On/Off) |
| pa_additional-configuration- |
Anti-shadow function to avoid false alarms (4 levels) / Independent adjustment of sensitivity in IR and microwaves |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, tamper and anti-masking |
| Power |
9.6 at 14.5 VDC |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54 |
| Bracket |
Includes wall bracket and L-bracket |
| Dimensions |
128 (H) x 41 (W) x 48 (D) mm |
DV-KAPTURE-K
In stock
1.194,01 kr.
| Brand |
Duevi |
|---|---|
| Model |
Kapture K |
| Technology |
Double technology: microwave (24 GHz) and curtain type PIR |
| Detection range |
Configurable: 3 m to 12 m (depending on installation) / PIR 7.5º / Microwave 30º |
| Frequency |
868 MHz Jeweller (built-in Ajax transmitter) |
| Pet immunity |
Not available |
| Installation height |
Recommended 2.2 m (from 2 to 4 meters) |
| Masking |
Available |
| Sensitivity |
Adjustable (potentiometer from 30% to 100% or through App) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue). IR detection (red) and Walk test (red): IR / blue: alarm confirmation) |
| DIP Switch configuration |
Walk-test (On/Off), Anti-masking (On/Off), Programming by App (On/Off), Unification of alarms on one output (On/Off) |
| pa_additional-configuration- |
Anti-shadow function to avoid false alarms (4 levels) / Independent adjustment of IR and microwave sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, tamper and anti-masking |
| Power |
2 batteries CR123A 3.0 V (low battery warning managed by Ajax) |
| Consumption |
Minimal consumption (Rest: 13 uA / Maximum: 4 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54 |
| Bracket |
Includes wall bracket and L-bracket |
| Dimensions |
128 (H) x 41 (W) x 48 (D) mm |
DV-MONOLITH-DT-K
In stock
1.546,40 kr.
| Brand |
Duevi |
|---|---|
| Model |
Monolith DT K |
| Technology |
Double technology: Microwaves (24 GHz) and double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Frequency |
868 MHz Jeweller (Ajax transmitter included) |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: microwave and alarm acknowledgement) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Low battery warning |
Signal sent by Ajax transmitter |
| Power |
Supplied by Ajax Transmitter (do not insert additional batteries) |
| Consumption |
Minimal consumption (Rest: 11 uA / Maximum: 5 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 106 (D) mm (transmitter spacing) |
DV-MOSKITO-F
In stock
1.393,15 kr.
| Brand |
Duevi |
|---|---|
| Model |
Moskito F |
| Technology |
Double side PIR (both sides) and double front PIR |
| PIR lens |
Adaptive lenses in 3 positions |
| Lateral detection field |
Configurable on each side: 3 m to 12 m (in 3 levels) / 10º |
| Front detection field |
Configurable: 2 m to 5 m (in 3 levels) / 180º |
| Installation height |
Recommended 2.2 m (from 1 to 1.4 meters) |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable on each side and front (potentiometer and jumper) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (6 red LEDs: one for each PIR / blue: alarm confirmation) |
| Sound indication |
Integrated buzzer for easy installation: alarm, sabotage, antimasking |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Independent sensitivity adjustment per side |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Left side alarm, right side alarm, front alarm, tamper and anti-masking alarm |
| Power |
9.6 at 14.5 VDC |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
190 (H) x 85 (W) x 75 (D) mm |
DV-MOSKITO-K
In stock
1.838,96 kr.
| Brand |
Duevi |
|---|---|
| Model |
Moskito K |
| Technology |
Double side PIR (both sides) and double front PIR |
| PIR lens |
Adaptive lenses in 3 positions |
| Lateral detection field |
Configurable on each side: 3 m to 12 m (in 3 levels) / 10º |
| Front detection field |
Configurable: 2 m to 5 m (in 3 levels) / 180º |
| Frequency |
868 MHz Jeweller (Ajax transmitter included) |
| Installation height |
Recommended 2.2 m (from 1 to 1.4 meters) |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable on each side and front (potentiometer and jumper) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (6 red LEDs: one for each PIR / blue: alarm confirmation) |
| Sound indication |
Integrated buzzer for easy installation: alarm, sabotage, antimasking |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Independent sensitivity adjustment per side / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Low battery warning |
Signal sent by Ajax transmitter |
| Power |
Supplied by Ajax Transmitter (do not insert additional batteries) |
| Consumption |
Minimal consumption (Rest: 26 uA / Maximum: 6 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
190 (H) x 85 (W) x 113 (D) mm (transmitter spacing) |
DV-MOSKITO-K-U
In stock
1.281,70 kr.
| Brand |
Duevi |
|---|---|
| Model |
Moskito K |
| Type of integration |
Universal |
| Technology |
Double side PIR (both sides) and double front PIR |
| PIR lens |
Adaptive lenses in 3 positions |
| Lateral detection field |
Configurable on each side: 3 m to 12 m (in 3 levels) / 10º |
| Front detection field |
Configurable: 2 m to 5 m (in 3 levels) / 180º |
| Installation height |
Recommended 2.2 m (from 1 to 1.4 meters) |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable on each side and front (potentiometer and jumper) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (6 red LEDs: one for each PIR / blue: alarm confirmation) |
| Sound indication |
Integrated buzzer for easy installation: alarm, sabotage, antimasking |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Independent sensitivity adjustment per side / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Power |
2 lithium batteries CR123A 3V (included) |
| Consumption |
Minimal consumption (Rest: 26 uA / Maximum: 6 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
190 (H) x 85 (W) x 113 (D) mm (transmitter spacing) |
Reviews
Clear filtersThere are no reviews yet.