Wired Detectors
A-C3
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
High power |
| Maximum detection distance |
In wood 20 mmIn ferrous materials 10 mmIn Aluminium 20 mm |
| Installation Form |
Surface |
| Cable length |
4 60cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
200 VDC max, 0.5A, 10W |
| Material |
Metallic |
| Dimensions |
52 x 19 x 13 mm |
A-C3P
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
High power |
| Maximum detection distance |
In wood 20 mmIn ferrous materials 10 mmIn Aluminium 20 mm |
| Installation Form |
Surface |
| Cable length |
4 60cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
ABS plastic |
| Dimensions |
56 x 19 x 13 mm |
A-CO
Out of stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
High Power |
| Maximum detection distance |
In wood 20 mmIn ferrous materials 10 mmIn Aluminium 20 mm |
| Installation Form |
Built-in |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
180 VDC max, 0.5A, 10W |
| Material |
Copper |
| Dimensions |
15 (8-7) x Ã24-20-10 mm |
A-R2
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Surface |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
Metallic |
| Dimensions |
46 x 9 x 12 mm |
A-R2P
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Surface |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
ABS plastic |
| Dimensions |
46.5 x 9 x 12 mm |
A-R3
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Surface |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
Metallic |
| Dimensions |
32 x 15 x 8 mm |
A-R3P
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Surface |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
ABS plastic |
| Dimensions |
32 x 15 x 8 mm |
A-R4
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Surface |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
ABS plastic |
| Dimensions |
23.5 x 14 x 6 mm |
A-S10
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Built-in |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
Copper |
| Dimensions |
25.6 x Ã10-7.5 mm |
A-S1P
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Built-in |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
ABS plastic |
| Dimensions |
29 x Ã10-8 mm |
A-SC4
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 2 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
High power |
| Installation Form |
Shutters and metal doors |
| Cable length |
4 wires 60cm shell |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
Metal |
| Dimensions (Detector / magnet) |
151 x 41 x 12 mm / 60.5 x 28.5 x 12 mm |
A-SS1
In stock
| Brand |
FDP |
|---|---|
| Security grade |
Grade 2 (EN50131-2-6) |
| Environmental class |
Class 4 / Suitable for outdoor IP65 |
| Technology |
Reed |
| Power |
Medium power |
| Installation Form |
Built-in |
| Cable length |
4 25cm(2 alarm / 2 tamper wires) |
| Magnet |
Neodymium |
| Electrical parameters |
100 VDC max, 1A |
| Material |
Copper |
| Dimensions |
15 x Ã10-6 mm |
CLH-111
In stock
| Security grade |
Grade 3 |
|---|---|
| Environmental class |
Class 4 / Suitable for outdoor |
| Technology |
Magnasphere |
| Power |
High power |
| Maximum detection distance |
On ferrous/non ferrous materials: 12/15 mm |
| Material |
Anodized aluminium case, ABS skeleton,stainless steel sheath |
| Cable length |
2 meters / 50cm stainless steel sheath |
| Magnet |
Neodymium |
| pa_resistance-to-mechanical- |
Up to 100G |
| Electrical parameters |
30 VDC max, 250 mA, 0.25W |
| Dimensions |
50 x 15 x 15 mm |
CLH-200-M
In stock
| Security grade |
Grade 3 |
|---|---|
| Environmental class |
Class 2 |
| Technology |
Magnasphere |
| Power |
High power |
| Maximum detection distance |
On ferrous/non ferrous materials: 12/15 mm |
| Material |
Anodized aluminium case, ABS skeleton |
| Cable |
Modular cable exit system / 4 connectors |
| Magnet |
Neodymium |
| pa_resistance-to-mechanical- |
Up to 100G |
| Electrical parameters |
30 VDC max, 250 mA, 0.25W |
| Dimensions |
56 x 25 x 25 mm |
CLR-TW-4C-W
In stock
| Security grade |
Grade 2 |
|---|---|
| Environmental class |
Class 4 / Suitable for outdoor |
| Technology |
Magnasphere |
| Power |
High power |
| Maximum detection distance |
With CRL-MGA: In wood 10 mmWith CRL-AL: On ferrous/non ferrous materials: 5/8 mmWith CRL-BL: In ferrous materials 6 mm |
| Material |
Plastic |
| Cable length |
4 wires of 50cm |
| Magnet |
Neodymium |
| pa_resistance-to-mechanical- |
Up to 100G |
| Electrical parameters |
30 VDC max, 250 mA, 0.25W |
| Dimensions |
19 x Ã11 mm |
CLR-TW-T-W
In stock
| Security grade |
Grade 2 |
|---|---|
| Environmental class |
Class 2 |
| Technology |
Magnasphere |
| Power |
High power |
| Maximum detection distance |
With CRL-MGA: In wood 10 mmWith CRL-AL: On ferrous/non ferrous materials: 5/8 mmWith CRL-BL: In ferrous materials 6 mm |
| Material |
Plastic |
| Cable |
Connector for 2 cables |
| Magnet |
Neodymium |
| pa_resistance-to-mechanical- |
Up to 100G |
| Electrical parameters |
30 VDC max, 250 mA, 0.25W |
| Dimensions |
19 x Ã11 mm |
CLV-03-W
In stock
| Environmental class |
Class 2 |
|---|---|
| Technology |
Magnasphere |
| Material |
Fiberglass reinforced nylon |
| Cable |
4 Thread system |
| Magnet |
Neodymium |
| Impact radius coverage |
In doors/windows : 1.75mOn the wall: 1.5m |
| pa_resistance-to-mechanical- |
Up to 100G |
| Electrical parameters |
30 VDC max, 250 mA, 0.25W |
| Dimensions |
108 x 22 x 17 mm |
DV-KAPTURE-F
In stock
| Brand |
Duevi |
|---|---|
| Model |
Kapture F |
| Technology |
Double technology: microwave (24 GHz) and curtain type PIR |
| Detection range |
Configurable: 3 m to 12 m (depending on installation) / PIR 7.5º / Microwave 30º |
| Pet immunity |
Not available |
| Installation height |
Recommended 2.2 m (from 2 to 4 meters) |
| Masking |
Available |
| Sensitivity |
Adjustable (potentiometer from 30% to 100% or through App) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue). IR detection (red) and Walk test (red): IR / blue: alarm confirmation) |
| DIP Switch configuration |
Walk-test (On/Off), Anti-masking (On/Off), Programming by App (On/Off), Unification of alarms on one output (On/Off) |
| pa_additional-configuration- |
Anti-shadow function to avoid false alarms (4 levels) / Independent adjustment of sensitivity in IR and microwaves |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, tamper and anti-masking |
| Power |
9.6 at 14.5 VDC |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54 |
| Bracket |
Includes wall bracket and L-bracket |
| Dimensions |
128 (H) x 41 (W) x 48 (D) mm |
DV-KAPTURE-K
In stock
| Brand |
Duevi |
|---|---|
| Model |
Kapture K |
| Technology |
Double technology: microwave (24 GHz) and curtain type PIR |
| Detection range |
Configurable: 3 m to 12 m (depending on installation) / PIR 7.5º / Microwave 30º |
| Frequency |
868 MHz Jeweller (built-in Ajax transmitter) |
| Pet immunity |
Not available |
| Installation height |
Recommended 2.2 m (from 2 to 4 meters) |
| Masking |
Available |
| Sensitivity |
Adjustable (potentiometer from 30% to 100% or through App) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue). IR detection (red) and Walk test (red): IR / blue: alarm confirmation) |
| DIP Switch configuration |
Walk-test (On/Off), Anti-masking (On/Off), Programming by App (On/Off), Unification of alarms on one output (On/Off) |
| pa_additional-configuration- |
Anti-shadow function to avoid false alarms (4 levels) / Independent adjustment of IR and microwave sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, tamper and anti-masking |
| Power |
2 batteries CR123A 3.0 V (low battery warning managed by Ajax) |
| Consumption |
Minimal consumption (Rest: 13 uA / Maximum: 4 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54 |
| Bracket |
Includes wall bracket and L-bracket |
| Dimensions |
128 (H) x 41 (W) x 48 (D) mm |
DV-KAPTURE-K-U
In stock
| Brand |
Duevi |
|---|---|
| Model |
Kapture K |
| Type of integration |
Universal |
| Technology |
Double technology: microwave (24 GHz) and curtain type PIR |
| Detection range |
Configurable: 3 m to 12 m (depending on installation) / PIR 7.5º / Microwave 30º |
| Pet immunity |
Not available |
| Installation height |
Recommended 2.2 m (from 2 to 4 meters) |
| Masking |
Available |
| Sensitivity |
Adjustable (potentiometer from 30% to 100% or through App) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue). IR detection (red) and Walk test (red): IR / blue: alarm confirmation) |
| DIP Switch configuration |
Walk-test (On/Off), Anti-masking (On/Off), Programming by App (On/Off), Unification of alarms on one output (On/Off) |
| pa_additional-configuration- |
Anti-shadow function to avoid false alarms (4 levels) / Independent adjustment of IR and microwave sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, tamper and anti-masking |
| Power |
2 batteries CR123A 3.0 V (included) |
| Consumption |
Minimal consumption (Rest: 13 uA / Maximum: 4 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54 |
| Bracket |
Includes wall bracket and L-bracket |
| Dimensions |
128 (H) x 41 (W) x 48 (D) mm |
DV-MONOLITH-DT-F
In stock
| Brand |
Duevi |
|---|---|
| Model |
Monolith DT F |
| Technology |
Double technology: Microwaves (24 GHz) and double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: microwave and alarm acknowledgement) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, tamper and anti-masking |
| Power |
9.6 at 14.5 VDC |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 81 (D) mm |
DV-MONOLITH-DT-K
In stock
| Brand |
Duevi |
|---|---|
| Model |
Monolith DT K |
| Technology |
Double technology: Microwaves (24 GHz) and double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Frequency |
868 MHz Jeweller (Ajax transmitter included) |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: microwave and alarm acknowledgement) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Low battery warning |
Signal sent by Ajax transmitter |
| Power |
Supplied by Ajax Transmitter (do not insert additional batteries) |
| Consumption |
Minimal consumption (Rest: 11 uA / Maximum: 5 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 106 (D) mm (transmitter spacing) |
DV-MONOLITH-DT-K-U
In stock
| Brand |
Duevi |
|---|---|
| Model |
Monolith DT K |
| Type of integration |
Universal |
| Technology |
Double technology: Microwaves (24 GHz) and double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: microwave and alarm acknowledgement) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Power |
2 lithium batteries CR123A 3V (included) |
| Consumption |
Minimal consumption (Rest: 11 uA / Maximum: 5 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 106 (D) mm (transmitter spacing) |
DV-MONOLITH-F
In stock
| Brand |
Duevi |
|---|---|
| Model |
Monolith F |
| Technology |
Double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: alarm confirmation) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm, Tamper and Antimasking |
| Power |
9.6 at 14.5 VDC |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 81 (D) mm |
DV-MONOLITH-K
In stock
| Brand |
Duevi |
|---|---|
| Model |
Monolith K |
| Technology |
Double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Frequency |
868 MHz Jeweller (Ajax transmitter included) |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: alarm confirmation) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Low battery warning |
Signal sent by Ajax transmitter |
| Power |
Supplied by Ajax Transmitter (do not insert additional batteries) |
| Consumption |
Minimal consumption (Rest: 8 uA / Maximum: 5 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 106 (D) mm (transmitter spacing) |
DV-MONOLITH-K-U
Out of stock
| Brand |
Duevi |
|---|---|
| Model |
Monolith K |
| Type of integration |
Universal |
| Technology |
Double volumetric PIR |
| PIR lens |
Both lenses horizontally adaptable up to 55º |
| Detection range |
Configurable: 3 m to 15 m (in 6 levels) / 90º |
| Pet immunity |
Available (installation height 1.2 ~ 1.3 m) |
| Installation height |
From 1.2 m to 2.2 m |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable (3 levels) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (red): Upper IR / green: Lower IR / blue: alarm confirmation) |
| DIP Switch configuration |
1- Walk-test (On/Off)2- Alarm unification in one output (On/Off) |
| Configuration in detector (LEDs and buttons) |
Sensitivity / Anti-masking / Anti-sabotage tamper / Mounting height / Pet immunity / Detection range (more info page). 9 manual in download section) |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Antimasking sensitivity / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Power |
2 lithium batteries CR123A 3V (included) |
| Consumption |
Minimal consumption (Rest: 8 uA / Maximum: 5 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
201 (H) x 79 (W) x 106 (D) mm (transmitter spacing) |
DV-MOSKITO-F
In stock
| Brand |
Duevi |
|---|---|
| Model |
Moskito F |
| Technology |
Double side PIR (both sides) and double front PIR |
| PIR lens |
Adaptive lenses in 3 positions |
| Lateral detection field |
Configurable on each side: 3 m to 12 m (in 3 levels) / 10º |
| Front detection field |
Configurable: 2 m to 5 m (in 3 levels) / 180º |
| Installation height |
Recommended 2.2 m (from 1 to 1.4 meters) |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable on each side and front (potentiometer and jumper) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (6 red LEDs: one for each PIR / blue: alarm confirmation) |
| Sound indication |
Integrated buzzer for easy installation: alarm, sabotage, antimasking |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Independent sensitivity adjustment per side |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Left side alarm, right side alarm, front alarm, tamper and anti-masking alarm |
| Power |
9.6 at 14.5 VDC |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
190 (H) x 85 (W) x 75 (D) mm |
DV-MOSKITO-K
In stock
| Brand |
Duevi |
|---|---|
| Model |
Moskito K |
| Technology |
Double side PIR (both sides) and double front PIR |
| PIR lens |
Adaptive lenses in 3 positions |
| Lateral detection field |
Configurable on each side: 3 m to 12 m (in 3 levels) / 10º |
| Front detection field |
Configurable: 2 m to 5 m (in 3 levels) / 180º |
| Frequency |
868 MHz Jeweller (Ajax transmitter included) |
| Installation height |
Recommended 2.2 m (from 1 to 1.4 meters) |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable on each side and front (potentiometer and jumper) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (6 red LEDs: one for each PIR / blue: alarm confirmation) |
| Sound indication |
Integrated buzzer for easy installation: alarm, sabotage, antimasking |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Independent sensitivity adjustment per side / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Low battery warning |
Signal sent by Ajax transmitter |
| Power |
Supplied by Ajax Transmitter (do not insert additional batteries) |
| Consumption |
Minimal consumption (Rest: 26 uA / Maximum: 6 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
190 (H) x 85 (W) x 113 (D) mm (transmitter spacing) |
DV-MOSKITO-K-U
In stock
| Brand |
Duevi |
|---|---|
| Model |
Moskito K |
| Type of integration |
Universal |
| Technology |
Double side PIR (both sides) and double front PIR |
| PIR lens |
Adaptive lenses in 3 positions |
| Lateral detection field |
Configurable on each side: 3 m to 12 m (in 3 levels) / 10º |
| Front detection field |
Configurable: 2 m to 5 m (in 3 levels) / 180º |
| Installation height |
Recommended 2.2 m (from 1 to 1.4 meters) |
| Masking |
Available: from 0ºC, always on (through App) or disabled |
| Sensitivity |
Adjustable on each side and front (potentiometer and jumper) |
| Tamper-resistant opening |
Available |
| Anti-sabotage tamper |
Available (motion accelerometer) |
| LEDs indication |
Alarm (blue) and Walk test (6 red LEDs: one for each PIR / blue: alarm confirmation) |
| Sound indication |
Integrated buzzer for easy installation: alarm, sabotage, antimasking |
| pa_additional-configuration- |
Antimasking (from 0ºC, always on or disabled) / Independent sensitivity adjustment per side / Sleep time (On/Off/Up to 60 s) |
| Configuration by App |
DV-BTLINK module required and download View Sensor App (Android) |
| Wired outputs |
Alarm and Fault (tamper and antimasking) |
| Power |
2 lithium batteries CR123A 3V (included) |
| Consumption |
Minimal consumption (Rest: 26 uA / Maximum: 6 mA) |
| Temp. operation |
-40 ºC ~ +70 ºC |
| Degree of protection |
IP54, Antivandalic IK10 |
| Dimensions |
190 (H) x 85 (W) x 113 (D) mm (transmitter spacing) |
GJD110
In stock
| Brand |
GJD |
|---|---|
| Technology |
PIR |
| PIR lens |
28 for each PIR |
| Detection range |
Adjustable: 10, 20 y 30 m / 10~70º |
| Installation |
Adjustable inclination: 180º H / 90º V |
| Installation height |
Recommended: 3 m / Maximum: 6 m |
| Pet immunity |
Available |
| Masking |
Not available |
| Tamper-resistant opening |
Available |
| LEDs indication |
Alarm |
| DIP Switch configuration |
LEDs, detection range m(10-20-30 ) and pulse (1 counter or 2) |
| Wired outputs |
NC/NO alarm and Tamper |
| Power |
9 at 15 VDC |
| Average consumption |
8 mA at 12 VDC |
| Temp. operation |
-20 ºC ~ 55 ºC |
| Degree of protection |
IP65 |
| Covered material |
High-quality chrome-plated metal |
| Dimensions |
145 (H) x 120 (W) x 115 (D) mm |
| Weight |
740 g |
GJD370
In stock
| Brand |
GJD |
|---|---|
| Technology |
Double technology: Microwaves (10.525 GHz) and double volumetric PIR |
| PIR lens |
28 for each PIR |
| Detection range |
Adjustable up to 15 m / 10~70º |
| Installation |
Adjustable inclination: 180º H / 30º V |
| Installation height |
Recommended: 1.8 m |
| Pet immunity |
Available |
| Masking |
Available |
| Tamper-resistant opening |
Available |
| LEDs indication |
Alarm, PIR, Microwave and Antimasking |
| DIP Switch configuration |
LEDs and impulse (1 counter or 2) |
| Wired outputs |
NC/NO Alarm, Tamper and Antimasking |
| Power |
9 at 15 VDC |
| Average consumption |
8 mA at 12 VDC |
| Temp. operation |
-20 ºC ~ 55 ºC |
| Degree of protection |
IP65 |
| Covered material |
High quality ABS plastic |
| Dimensions |
145 (H) x 120 (W) x 115 (D) mm |
| Weight |
740 g |